Garage. Tuesday , April 17th , 2018 - 01:58:57 AM
The shelving support structure or frame will vary in gauge and shape depending on its intended use. The structural members consist of uprights, front & side supports, center supports, cross braces, and some type of fastening system. Not all of these support structure members will be present on every design, but at a minimum will have uprights and front/side supports. The steel support members can be formed into many shapes with the most common being tubular, punched "L" angle, or punched "C" channel. Light tubular style supports are very typical for use in wire shelving systems for light duty to medium duty loads. "L" angle is used for medium duty to heavy duty loads, and "C" channel supports are used for extra heavy duty loads. The "L" and "C" support member steel is punched with square, round, triangular or teardrop shaped holes which allow a variety of fastening systems to be used to join them together.
There are two types of garages in this country. The first has plenty of room for two cars, gardening equipment and seasonal items. The other type has all the same equipment stored in it but no room for a car much less two. The difference, while not always apparent, is usually a judicious use of shelves for home use and an ability to organize the things that go on them. Garage storage racks can be as simple as wooden shelves affixed to each wall or metal lockers with doors that close and keep all of the material out of sight.
Examples of light duty storage might include storing boxes of clothing, shoes, Christmas decorations, or anything that is less than around 200 pounds. Medium duty shelving ranges anywhere from 300 to 500 pounds and might include heavier boxes, tools, paint cans, automotive fluid containers and typical garage junk. Heavy duty shelving systems range from 500 to 1500 pounds and examples are fertilizer bags, large tools, tool chests, and multiple heavy boxes. Extra heavy duty capacities range from 1500 to 10000 pounds with examples including tire racks, document storage, machine parts, engine blocks, and bulk liquids or solids storage. Anything over 10000 pounds is usually classified as bulk racks or palate racks, and they are typically found in mechanic shops, storerooms or warehouses and have capacities that can exceed 30000 pounds.
Label :Garage Opener‚ Overhead Garage‚ Garage Fix or Garage Installation‚ Overhead Door‚ Door Repair or Residential Garage‚
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ROKNASALA claim ownership or responsibility for such items a and you should seek legal consent for any use of such materials from its owner.