Garage. Wednesday , April 11th , 2018 - 23:06:31 PM
Worktop surfaces come in many material and designs. Depending on the intended use one material may be more suitable than another. Common materials are steel, wood, solid plastic, plastic laminate, and others. Steel worktops are typical for heavy duty use. They will not become oil soaked or crack and are extremely tough. Mechanics and small engine repair shops favor this material as well as welders who might damage other work top surfaces. Disadvantages are scratching or denting if they are hit sufficiently hard. Wood tops can be made of solid hardwood like maple or made of plywood, MDF or other manufactured wood material. Hardwood worktops resist damage by sharp tools and hard blows, and is ideal for tool and die work, electrical wiring, fabric cutting and is favored by woodworkers. The drawback is once damaged it may be expensive to replace. Manufactured work surfaces like MDF or particleboard is the preferred surface for industry. They are warp and splinter proof and are highly resistant to oil and moisture. They are also less expensive than hardwood and can be easily replaced if damaged. Plastic worktops provide strength, chemical resistance, and are non-conductive. Plastic is great for electronics assembly, circuit board repair or any application that may be prone to spills. However plastic may be too slippery for woodworking and favor applications like ceramics work, pottery or anything that requires moisture or chemical resistance.
A common material for pre-manufactured workbench legs and supports is steel sheet. As we discussed in our previous article "A Handy Guide on Shelving Systems for the Home Garage and Workplace", the thickness of sheet metal is called its gauge and the lower its gauge number is, the thicker the steel is. Steel sheet ranges from about 30 gauge to 8 gauge, with thinner 30+ gauge material called foil and thicker 8 gauge or less material called plate. Typical workbench supports range from around 12 to 16 gauge. Stringers and lower shelves add stability and strength to the legs and allow for heavier loads to be applied. They do this by connecting the legs together below the worktop and forming a rigid structure that helps support itself. Without additional support the workbench legs would easily fold under and collapse when weight is applied. The design may favor stringers alone if the workbench is intended to be used while sitting, allowing for the person’s legs to extend under the worktop. Lower shelves may also be incorporated into the design for storage below the worktop surface, and may be partial or full sized shelves depending on its use. Though load carrying capacities are frequently not listed on workbenches, a general rule of thumb is to use a thicker gauge steel support structure for heavier duty workbench applications.
The Proper Car Lifting Equipment There are several different methods that can be used to lift or elevate your car enough so that you can work on its undercarriage. The prices for these different types of car lifting tools and equipment vary depending on quality, name brand, and weight capacity.
Label :Torsion Spring‚ Shop Doors‚ Repair Garage as well as Garage Motor‚ Garage Opener‚ Carriage Doors also
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ROKNASALA claim ownership or responsibility for such items a and you should seek legal consent for any use of such materials from its owner.