Julieta Castro Almeida. Garage. April 13th , 2018.
If your garage is a mess, don’t feel bad...you’re not alone. In fact, most people tend to use their garage as a catch-all for clutter instead of a useful and practical part of their home. When people have something bulky that they want to keep, but not in their house, the garage is usually where it ends up. Naturally, the garage is the easiest and most convenient place to put it. This is perfectly fine, for a while at least. Eventually, the garage becomes overwhelmingly full of stuff and it becomes more and more difficult to find things.
In addition to the main pieces of a workbench there are many add-ons that are used to increase utility. Back and End stops might be installed to prevent things from rolling off onto the floor. Drawers, shelves and risers can be added for increased storage. Electrical power strips and outlet cutouts can be incorporated into the design as well to run tools, grinders, drill presses, etc. Vises and clamps can also be added to help secure whatever you are working on. The best place to start when choosing a design is to define the intended use. Once that is established the support structure, worktop, add-ons and size can be more easily selected. There are literally thousands of available workbench designs and configurations, many of which will suit your needs and budget. When in doubt contact your supplier for assistance selecting an appropriate design.
The shelving manufacturer will measure the load carrying capacities of each individual component and together as a shelving system to come up with a maximum shelf capacity and rating. It is very important to note that the rating given to a shelving system is based on slowly adding weight, evenly distributing it over the entire shelf. It will not support that weight if concentrated on one part of the shelf. The manufacturers rate their shelves as light duty, medium duty etc. Do not to let these ratings determine your design selection as every manufacturer rates their shelves differently and there is no commonly adopted rating system. Only careful consideration of the shelf’s intended use should be given when choosing a shelving design to prevent catastrophic structure failure.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ROKNASALA claim ownership or responsibility for such items a and you should seek legal consent for any use of such materials from its owner.